 | Latest Feed April 28th Tuesday 2009 - Complete Gasket Set from Motoforce
Gasket Set for Long Minarelli EnginesWe can now offer you an inexpensive set of replacement gaskets for Minarelli (MA, MY) from Motoforce. This set in OEM quality includes the gear cover gasket as well as reed valve gasket, a complete cylinder gasket set for AC and LC and a engine cover gasket for long Minarelli engines. |
 | 28/04/09 - Cylinder Stud for Minarelli / Piaggio
Motoforce Cylinder Stud for Minarelli / PiaggioThese high-quality stud bolts from Motoforce are now available for Minarelli and Piaggio. Perfect to build a new engine or replace oxidized stud bolts. Also available are economy packs with 45 pieces each.
|
 | 28/04/09 - Speedo Drive
Replacement Speedo Drive from MotoforceBargain speedo drive in OEM quality from Motoforce. For Gilera Runner, Piaggio TPH, MBK Nitro/Yamaha Aerox and Aprilia SR, they are supplied greased and thus ready to fit. |
 | 28/04/09 - Motoforce Racing Crankshaft
Motoforce Racing Evolution Crankshaft with 85 mm CThe high-quality crankshaft Racing Evolution from Motoforce with 12 mm gudgeon pin is now also available in a version with 85 mm conrod. Equipped with first-class silver thrust washers and bearings, it is an inexpensive alternative for all racing engines with up to 15,000 rpm.
|
 | 28/04/09 - Handlebar Fairing for Nitro / Aerox
STR8 Handlebar Fairing Without Indicators for NitrThis front handlebar fairing from STR8 goes without any indicators. So if you favour a clean style for your cockpit and don?t need any indicators or have positioned them somewhere else, then this part is perfect for you. Available either unpainted or in white, black or carbon look. |
 | 27/04/09 - Bell Mouth Stage6 MKII
Bell Mouth Stage6 MKII for Stage6 R/T CarburettorThe Stage6 bell mouth is now available in the MK II version for Stage6 R/T, PWK and Koso carbs. The basic characteristics have been changed. Thanks to the outer hex socket screws, it cannot slip. The connection size for a possible mounting of air filters is increased to 70 mm. Available in orange, hard-anodised, black matt and chrome. |
 | 27/04/09 - Stage6 Brake Disc
Stage6 250 mm Oversize Brake Disc for Malaguti F12This new wavey oversize brake disc from Stage6 is now available for the Malaguti F12 with 3-hole brake disc mount and has a full 250 mm diameter. As you know it from oversize systems, this one is also available either made of steel or stainless steel. The steel version has much better braking power than the stainless steel version but is of course more prone to rust. So you will have to choose between performance and style. The 6-point floating brake disc comes in a new design and will be used with the included brake calliper. |
 | 27/04/09 - Rear Light Bezel for Speedfight 2
Rear Light Bezel STR8 for Peugeot Speedfight 2This bezel is just the right thing to trick up your original Speedfight 2 rear light. With the 3M double-sided tape included, the bezel can easily be attached. Please make sure to clean the rear light thoroughly beforehand in order to ensure perfect fit and adhesion. Available in different colours.
|
 | 27/04/09 - Polini Evolution 3 for Piaggio LC
Cylinder Kit Polini Evolution 3 for Piaggio LCThe new Polini Evolution is now available in the third edition. No major features have been changed except the exhaust port, which has been completely reworked and now is a bridged port instead of the main port with the two auxiliary ports as in the Evo 2 version. The combustion chamber is mostly unchanged. The inner cylinder head has, however, been designed to offer better thermal properties. The finish is of course again of the best quality. The delivery includes all parts necessary for mounting; only available for Piaggio. |
 | 17/04/09 - Hydraulic Lift
For all Piaggio Models, 360 Degrees TurnableThe hydraulic lift of the company OMCROP is the perfect way to fasten your Piaggio scoot securely if you want to work on it. Thanks to the fitted rollers, you can move the lift together with the scoot. Furthermore, the upper part can be turned by 360? ? this way you won?t have to take the scoot down and/or turn the whole lift. The complete upper support will be attached to the floorboard, securely fixing the vehicle. Can be used to lift a maximum weight of 350 kg. |
 | 17/04/09 - Side Spoilers for Booster / BWs
BCD RX Side Spoilers for Booster / BWs from 2004 oThese cool spoilers are now available for Boosters built 2004 and later. They match BCD?s RX style fairings and will make your scoot look more aggressive and sporty. Of course they can also be used without the front and tail fairing. Available in black and white. |
 | 17/04/09 - Underbody Spoiler for Booster / BWs
BCD RX Underbody Spoiler for Booster / BWs from 20These cool underbody spoilers are now available from BCD for Boosters built 2004 and later. They match the RX style fairings and will make your Booster look lower and more aggressive. Of course they can also be used without the front and tail fairing. Available in black and white. |
 | 17/04/09 - Downhill Handlebar BCD Cross
BCD CrossWe can now offer you these very stylish downhill handlebars from BCD?s cross series. The handlebar comes with a black bar pad that can be placed over the cross bar. Available in black matt, white, blue anodised and polished aluminium. |
 | 17/04/09 - Undertray for Piaggio NRG
Undertray Kiesler for Piaggio NRG PowerKiesler now offers this new highlight for the new Piaggio NRG Power. This part has been deep-drawn from ABS plastic and sports the well-known Kiesler gills design. Just the right thing to provide your scoot with the ultimate in race look. |
 | 17/04/09 - Shocks for Piaggio
?hlins Shock Absorber TTX36 for Piaggio?hlins is one of the top companies for high-performance and high-quality suspension components and its shock absorbers are an integral part of motorsport history. For the Piaggio Zip with single-sided swingarm, we can now offer the front shock absorber from ?hlins. This highend part will win you over with its quality and functionality. Together with the rear shock absorber for all Piaggio models, which is of course as brilliant as the front part, this will optimise your suspension. The high price of the product is definitely justified for such an exclusive racing component. |
 | 23/02/09 - Torque Springs
Stage6 Torque Spring for Piaggio, Minarelli and PeThese black-coated torque springs from Stage6 are available as soft, medium and hard versions. Due to tuning, the drive belt may start to slip, which will make a stronger torque spring necessary. You will usually notice that the engine revs up but you can’t feel any acceleration. The strength of a torque spring is marked on the spring itself so you won’t have any problems identifying it. Available for Piaggio, Peugeot and Minarelli, just like they are already supplied for Stage6 SportPro variators. |
 | 16/02/09 - Motoforce Carburettor
Carburettor Motoforce Racing PWK 21, 24 and 28 mmThe PWK carburettors from Motoforce RACING replace the Stage6 PWK from our range and offer the same excellent quality. The CNC-machined intake tract allows for better engine breathing, which translates into better throttle response. Outer diameter of the carb, as well as the connection size for the intake manifold (35 mm) have been reduced, making mounting easier. The carburetor comes with fuel and vacuum connection, but not with oil connection!! Available in sizes 21, 24 and 28 mm. |
 | 16/02/09 - Clutch Spring Set
Motoforce Clutch Spring Set for Original ClutchWith its coloured clutch spring sets, Motoforce offers an excellent alternative to the products of other manufacturers. Three sets with different strengths make for later engagement of the clutch. We recommend them for mild tuning, e.g. when a sport exhaust system has been fitted and / or the vario has been modified. Comes with springs of three different strengths. |
 | 16/02/09 - Replacements Parts for CPI
Motoforce Replacement Parts for CPI EnginesWe can now supply you with some kickstart spares for CPI models from Motoforce. The parts come in OEM quality. |
 | 13/02/09 - Rear Lights for NRG
Rear Light STR8 Lexus LED with Indicator FunctionThis is a Lexus style LED rear light from STR8 with E-mark for Piaggio NRG Power. Integrated into the lamp are indicators: when activated, a part of the SMDs on the right or the left side respectively start to flash orange. |
 | 12/02/09 - GY6 Engines Oil Filler Plug
Oil Filler Plug STR8 for GY6 Engines, e. g. Rex RSSTR8 now offers this as an alternative to the stock part; so you won’t have to do without this gem when you ride e.g. a REX RS 450 or other scoots that have a 50cc GY6 four-stroke engine. Available in silver, red anodised and blue anodised. |
 | 11/02/09 - Bar Ends
Anti-Vibration Bar-End Weights STR8 CNCThese new STR8 bar-end weights in CNC-style are available in four colours. The 6-star design contributes to the cool racing style. The weights simply clamp into the handlebar via a bolt. It may be necessary to cut the grips in order to be able to attach the bar-end weights. |
 | 10/02/09 - MBK Nitro / Yamaha Aerox Rear Light
Rear Light Trim STR8 for MBK Nitro / Yamaha AeroxThis is an ideal choice if you are looking for something to perk up your original Aerox / Nitro rear lights. With the high-quality 3M double-sided tape included in the delivery, the trim can easily be attached. Please make sure to clean the rear light thoroughly before attaching the trim to ensure fit and adhesion. Available in black, carbon-look, white and chrome. |
